,

Kaishan KG510/KG510H Down The Hole Crawler Drilling Rig Machine For Mining and Rock Drill

Kaishan KG510/KG510H Down The Hole Crawler Drilling Rig Machine For Mining and Rock Drill

The KG510/KG510H down the hole drill rig for open use is an improved device in compliance with national regulations ondiesel-engine emissions. Equipped with the Yuchai four-cylinder engine(China Ⅲ),the drill rig meets national standards foremissions and environment. The folding frame track and four-wheel drive are adopted, and track leveling and the walking motor of plunger piston improve the working pressure and climbing capacity. The expanded pitch and lifting-arm hydraulic cylinder enable it to meet the requirements of limiting position. The double-motor rotation increases the rotary torque and revolving speed,and the lifting hydraulic cylinder and chain are expanded to promote the lifting force and reliability. The dust collector is enlarged to produce a better effect on dust collection. The thickened profile folder is used for the housing, thus improving its level of      intensity and rigidity, and the additional ring makes handling and lifting convenient.

The KG510H down the hole drill rig for open use is equipped with a dust collector, thus making operation more environment-friendly and reliable.

YC4DK80-T302(58KW/2200r/min) KG510 KG510H
Weight of complete machine 6500KG 7000KG
Outer dimensions 6800×2200×2850mm 6800×2450×2850mm
Drilling Hardness f=6-20
Drilling diameter Φ105-152mm
Depth of economical drilling 25m
Rotary speed 0-100rpm
Rotary torque(Max) 3500N·m(Max)
Lifting force 40KN
Method of Feed Oil cylinder-Roller chain
Feed strock 3000mm
Travelling speed 0-3.5km/h
Climbing capacity ≤30°
Ground clearance 440mm
Tilt angle of boom Down: 135°, up: 50°, total: 185°
Swing angle of boom Left: 50°, right: 50°, total: 100°
Pitch angle of drill boom Down: 50°, up: 25°, total: 75°
Swing angle of drill boom Left: 45°, right: 45°, total: 90°
Leveling angle of track ±10°
Compensation length of beam 900mm
Supporting power Yuchai YC4DK80-T302(58KW/2200r/min)
DTH hammer K40
Drilling rod Φ76×3m or Φ89×3m
Air consumption 13-22m3/min
Maximum height of horizontal hole 3700mm
Minimum height of horizontal hole 350mm